T-C · Aug 19, 2019

Hi all,

I’m trying to bleed the ABS brakes on my soft dash LSE. I’ve bought an Easy bleed and am following the instructions in the workshop manual. However, nothing is coming through when opening the nipples. There is some feel in the pedal but not much.

Any advice?

gstuart · Aug 19, 2019

T-C said:
Hi all,

I’m trying to bleed the ABS brakes on my soft dash LSE. I’ve bought an Easy bleed and am following the instructions in the workshop manual. However, nothing is coming through when opening the nipples. There is some feel in the pedal but not much.

Any advice?

Hi

I would disconnect the brake bleeder , put some cling film over ur brake master cyl , take out ur bleed nipples in turn, then check each one that there nice and clean and free from obstructions , , also use a torch to ensure the calliper holes are also nice and clean , then put back and try again

Don’t forget don’t let the ABS modulator empty as u then may need diagnostics

See how u get on plse

T-C · Aug 21, 2019

Thanks. The nipples and hoses are clean. Last night I got fluid to come through the front callipers.

However, the ABS pump is not running. It sounds like it is just clicking instead of coming on. It did pump during one of the first bleeding attempts. Shorting the pump gets it to run. Is there a way of getting it to run as normal?

gstuart · Aug 21, 2019

T-C said:
Thanks. The nipples and hoses are clean. Last night I got fluid to come through the front callipers.

However, the ABS pump is not running. It sounds like it is just clicking instead of coming on. It did pump during one of the first bleeding attempts. Shorting the pump gets it to run. Is there a way of getting it to run as normal?

Hi

Apologises I’m not 100% familiar with ur rangie

Have found these which I hope will help

T-C · Aug 21, 2019

Thanks. That will be useful. I'll start a thread about the new problem.

Grrrrrr · Aug 22, 2019

T-C said:
Thanks. The nipples and hoses are clean. Last night I got fluid to come through the front callipers.

However, the ABS pump is not running. It sounds like it is just clicking instead of coming on. It did pump during one of the first bleeding attempts. Shorting the pump gets it to run. Is there a way of getting it to run as normal?

Try swapping the relay.

T-C

Member

gstuart

D3 Grandad

T-C

Member

gstuart

D3 Grandad

T-C

Member

Grrrrrr

Technician, Bodgit & Scarper Ltd

Similar threads