congo181

congo181

Well-Known Member
After finishing fitting the 12J motor in my 110 rebuild today I couldn’t resist trying to start it. Unfortunately, the starter gets very warm very quick, with a bit of smoke just for fun.

Are these starters feasible to rebuild, and is it worth it?
So far, all I know is that it’s a Lucas, but I see the price of a genuine LR one is over £700!!!!!!!!
 
The britpart ones are cheaply made, but seem to last okay.
I think the starter is the same as 200/300.

I would check all the cabling first before blaming the starter, try bypassing each cable in turn with a jump lead cable.

Yes you can strip the lr one and see what if anyhting is wrong with it, but be aware just because it works fine on the bench is not a guarantee it will work on the car.
 
congo181 said:
Wai?? I never heard of them… wouldn’t I be better rebuilding the real LR one if possible?
Click to expand...
Wai is a well known manufacturer that do predominantly make starter motors and alternators etc... I've had a few items made by them and never had an issue.
 
When it comes to parts do not be taken by the thought that if you pay seven times the price you will get something seven times better .
 
I’ve got a Wosp high torque starter for my Tdi. It was around £250. They likely do one for the 19J too.
 
You must log in or register to reply here.

Similar threads

S
starter motor questions
Replies
17
Views
1K
McBoon
McBoon
landy-lee
Can i test my starter motor?
Replies
8
Views
1K
headintheclouds
H
stoney424
TD5 non starter after starter motor rebuild
Replies
4
Views
1K
stoney424
stoney424
Gunter Shingleditch
Freelander 1 TD4 puff of smoke on start-up, stinky exhaust and shudders at 1000 RPM - SOLVED
Replies
15
Views
2K
kernowsvenski
kernowsvenski
Al2O3
Oil Pressure in Different Parts of the Engine
Replies
8
Views
1K
Al2O3
Al2O3