R

Raymondostonahoy

New Member

• Sep 1, 2020

• #1

Hi all, I am new to this, a new member so hello all. I purchased a D2 about 3 weeks ago, needed to replace the suspension air bags. Did one side no issue, replaced the other side however the airline pops of when bag is fully inflated. The fittings on the top are push fit, the ones I replaced had a collar to push in to release the airline. Any advice plse would be great. Thanks in advance.

 

N

Nig43

Active Member

• Sep 2, 2020

• #2

Did you push it in then pull it out so that it grips?

 

Landmark2

Well-Known Member

• Sep 2, 2020

• #3

Older design bags had screw in connectors with an olive on the air line (a bit like home plumbing). They all now seem to come with the push in type. I believe they're called voss connectors.
Check which type you have.

 

R

Raymondostonahoy

New Member

• Sep 2, 2020

• #4

Many thanks for the above guys. They are both push fit, looks like a nut to push airline into with o rings inside. Pushed in airline last nite, stayed in so far been out on a long drive, I am just not convinced, does not seem very secure.