Johnny_Regis

Active Member

• Oct 29, 2016

• #1

hello!
SIII SWB 1972.

I've just installed a very expensive set of points. As I was leaning in to set the gap. I punctured the back of my newish radiator with a light press from a screwdriver!

My original rad was blocked, so got a plastic and aluminium one fitted. Turns out it's pretty feeble. I would imagine a stone chip could've punctured it too.

Anyone fitted a new radiator they've been impressed with? Who made it?!

Haven't got the original one, so can't have that recored. Would consider a recored one but only if tested and guaranteed.

Cheers

 

Bobsticle

De Villes Advocaat

• Oct 29, 2016

• #2

I have just fitted a Champion plastic/ally rad. Seems OK for the price.
Still have the original leaking one, waiting for a trip to the tip.

 

J

John S

Well-Known Member

• Oct 30, 2016

• #3

I replaced mine with a Brit****e one. See Bobsticle's recent post. Mine took some fettling to fit, with one bolt hole out of alignment. Cost I recall around £140 including new hoses' n Jubilee clips. Took an evening to swap out, not too bad a job.

 

samc88

Drivels spiritual representative

• Nov 1, 2016

• #4

Bobsticle said:

I have just fitted a Champion plastic/ally rad. Seems OK for the price.
Still have the original leaking one, waiting for a trip to the tip.

Click to expand...

Might be worth getting it recored. Not going to bother with a new one for mine, just going to recore it

 

Johnny_Regis

Active Member

• Nov 5, 2016

• #5

Thanks for responses, fitted a Bearmach one, seems sound enough.

 

Bobsticle

De Villes Advocaat

• Nov 5, 2016

• #6

Johnny_Regis said:

Thanks for responses, fitted a Bearmach one, seems sound enough.

Click to expand...

Dont get the Bearmach one from Paddocks

https://www.landyzone.co.uk/land-rover/radiator.305499/

 

Johnny_Regis

Active Member

• Nov 5, 2016

• #7

Bobsticle said:

Dont get the Bearmach one from Paddocks

https://www.landyzone.co.uk/land-rover/radiator.305499/

Click to expand...

Got mine from fleabay genuine Bearmach. I had to separate the rad from the surrounding frame, fit the frame then bend the top out slide the rad in from the top and bend the top back in as holes wouldn't line us an assembly, but separating the frame first solved that.

I never fit anything that comes in a blue box!

 

kommer2013

Active Member

• Nov 11, 2016

• #8

Bobsticle said:

I have just fitted a Champion plastic/ally rad. Seems OK for the price.
Still have the original leaking one, waiting for a trip to the tip.

Click to expand...

i had an old 4 core radiator, and i was going to scrap it, instead i took it to the scrap metal yard and got $18 for it as it is copper and brass.

Tony.