crossa

New Member

• Oct 31, 2007

• #1

Well I got my Series III owners manual today and it's an eye opener it tells you useful stuff like torque settings and steering angles, it even has a wiring diagram, and a fault finding section that does not say take it to your nearest dealer.

Oh and I thought my diesel engine only had 61bhp but according to the manual it has 67, so it should fly along. Well once I get it on the road that is.

 

Grippa

New Member

• Oct 31, 2007

• #2

crossa said:

Oh and I thought my diesel engine only had 61bhp but according to the manual it has 67, so it should fly along.

Click to expand...

Yerll lurve it, but it wunt.

 

S

Sean

Banned

• Oct 31, 2007

• #3

have you found where the OBD port is yet ?

 

crossa

New Member

• Oct 31, 2007

• #4

Sean said:

have you found where the OBD port is yet ?

Click to expand...

Yep page 173 says for On Board Diagnostics, hit any part with a hammer and see if the fault clears.

 

Grippa

New Member

• Oct 31, 2007

• #5

crossa said:

Yep page 173 says for On Board Diagnostics, hit any part with a hammer and see if the fault clears.

Click to expand...

Starting with the driver. Works more often than not.

 

iannotts

New Member

• Oct 31, 2007

• #6

crossa said:

Yep page 173 says for On Board Diagnostics, hit any part with a hammer and see if the fault clears.

Click to expand...

Have you read page 174 that says if that dont work hit it with a bigger hammmer