BritishLeylandLover

Member

• Dec 13, 2017

• #1

Hi can anybody post me a picture of theirs from the rear ( spring shackles that is!) Ive just fitted a new rear x member and despite using the rear tub and taking lots of measurements they don't seem to line up on one side... See pictures... One on the left does, One on the right doesn't, I hope it's something daft like it will line up once I've lifted the axle back up.... I need to see what spacers are fitted and where etc. thanks

 

tottot

Well-Known Member

• Dec 13, 2017

• #2

If you are sure the rear crossmember is square then there can't be much wrong,put the hangers on and bolt it all up with wheels on the ground.Slacken the axle U bolts,it may help some.

 

BritishLeylandLover

Member

• Dec 13, 2017

• #3

Me being stupid, I put a jack under the offside hub and it lined up as I jacked it up...

 

R

rob1miles

Well-Known Member

• Dec 13, 2017

• #4

We all need a few more self-fixing problems like that!

 

tottot

Well-Known Member

• Dec 13, 2017

• #5

Ah well,all good then.