Matty p

Member

• Jan 22, 2020

• #1

Afternoon all,I'm currently renovating a '69 series 2a. I have purchased two new cab doors,whilst attempting to fit them i have noticed that the check strap/door stays have no location points on the new doors(basically a slot where the nylon bush runs).
Can anyone please tell me if you have to modify the door or replace the door stays? Many thanks

 

R

Rodeo Joe

Well-Known Member

• Jan 22, 2020

• #2

Matty p said:

Afternoon all,I'm currently renovating a '69 series 2a. I have purchased two new cab doors,whilst attempting to fit them i have noticed that the check strap/door stays have no location points on the new doors(basically a slot where the nylon bush runs).
Can anyone please tell me if you have to modify the door or replace the door stays? Many thanks

Click to expand...

A picture of the ones you've got would be handy.

 

Blackburn

Well-Known Member

• Jan 22, 2020

• #3

yrm or bits for landy sell a conversion kit doors you have are series 3.
Have you posted this on series 2 forum as well because it was just discussed a couple of days ago.

 

Matty p

Member

• Jan 22, 2020

• #4

Thanks for your reply Blackburn, haven't posted before and i haven't seen the previous discussion. I will have a look at the conversion kit and let you know how i get on. Many thanks