hi folks. got a series one that needs a replacement nut and olive to connect up the vacume pipe at the carb. does anyone know where i could get this from or does anyone have the parts i need they could supply.

the carb is a solex 32pb1 if this helps cheers. my user is my email if you could contact me that way cheers jase.

Have you actually lost it?

If not, I think that an imperial brake pipe nut was about the same size, although I don't remember if I had to re-tap the hole or not!

I used a flared brake pipe end with about half an inch sticking out from the nut and make off the joint with a bit of rubber pipe.

If you still have the original, check first!

Hope this helps.