D

discodavey1969

New Member

• Sep 2, 2007

• #1

Has anyone had the same problem as me? I'm trying to get my Sedimenter of my Discovery 1 but firstly i can't even undo the plastic drain plug and secondly, i can not undo the inlet fuel pipe. Is it me or is this a common thing.

 

S

stig

New Member

• Sep 2, 2007

• #2

no need to remove the whole unit to flush out, on top of the housing there is a 7/16" bolt, undo that and the bowl will come off. Never try and force the plastic drain tap as it will shear off.

 

RAZ8550TDI

New Member

• Sep 2, 2007

• #3

be prepared for fuel to ****down yer arm also. hehe.

 

Pikey

Dummy Ejection Facilitator..

• Sep 2, 2007

• #4

Ya don't need to undo the fuel pipes.

 

J

JimAttrill

New Member

• Sep 2, 2007

• #5

Those placky drain taps are a menace. I didn't do mine up enough the first time I drained it and spent ages bleeding the whole system. The engine would run and then stop if the accelerator was pushed. Since then I have sheared it off, and it's staying like that!