nengelbrecht6
Member
First time Landy owner here. Just picked up a 1985 110 CSW and am trying to decide whether I should put two 2-man benches, two 3-man benches or four tip ups in the load area. Any suggestions or advice from you pros?
First time Landy owner here. Just picked up a 1985 110 CSW and am trying to decide whether I should put two 2-man benches, two 3-man benches or four tip ups in the load area. Any suggestions or advice from you pros?
BnQ have a garden sale on at the moment. Cheap benches anorl. ound:
How long have you Ben driving?
I ask because newer licences only allow the driver 8 seats maximum. My 9 seat 110 can't be driven by my lads!
My 1988 90 county has the four individual tip-up seats in the back which I reckon are the best option. You can then, for example, fold up some seats to make space for stuff while still having a seat or two in the back. When I went camping last year, we had one guy sitting nearest the door, with the other seats folded for the camping gear.
You wouldn't get this flexibility with bench seats, plus the individual seat backs are slightly shaped to make the more comfortable. I certainly wouldn't want to put 3 on a bench for more than a few miles.
With no seatbelts in the back (not required for side-facing seats) you could technically put 2 or 3 on a bench. If you do fit belts, you use lap belts only.
While they're not technically as safe as forward-facing seats with 3-point seatbelts, my personal opinion is that there probably isn't much difference in practical terms, plus the forward-facing seats really don't work that well ergonomically with access through the back door. Rear-facing might be an option though...
One thing I have never understood is how, in a defender, forward-facing seats are supposed to be safer. Look at this for example:
(from exmoor trim)Load Area Seats : LOCK AND FOLD - Left Hand
In order to get in and out of the back, you first have to fold up the seat. In a situation where you have to exit the vehicle quickly, how can that possibly be safe? They also say they're suitable for kids, and yet I can't see how you'd fit a kiddie seat+occupant to them without having to clamber over from the front. And they want how much for these?
Can the bench seats be fitted and removed easily?
Ta!Easily yes, bit time consuming though. Nuts are obviously on the underside of the Landy. I recall it was 4 nuts&bolts per bench.