v8250
Well-Known Member
This looks like your part number https://www.lrworkshop.com/parts/FCL500140PMA
Not sure if this is still available so you may need to buy a non-speaker unit and cut hole for speaker mounting https://www.lrworkshop.com/parts/MTC3523
You'll need to sit down with a stiff drink before seeing price
Better still, just make one up with some 1.5mm st/st plate, dense neoprene and vinyl outer cover.
Not sure if this is still available so you may need to buy a non-speaker unit and cut hole for speaker mounting https://www.lrworkshop.com/parts/MTC3523
You'll need to sit down with a stiff drink before seeing price
Better still, just make one up with some 1.5mm st/st plate, dense neoprene and vinyl outer cover.
Inm90
New Member
Hi thanks for the info for some reason my searches didn't find it , your not wrong about the price ! ! I think peel off vinyl and foam ,grind off rust rivet on strengthening plate , paint and stick cover back on us the cheaper option !!This looks like your part number https://www.lrworkshop.com/parts/FCL500140PMA
Not sure if this is still available so you may need to buy a non-speaker unit and cut hole for speaker mounting https://www.lrworkshop.com/parts/MTC3523
You'll need to sit down with a stiff drink before seeing price
Better still, just make one up with some 1.5mm st/st plate, dense neoprene and vinyl outer cover.
