dr pepper
New Member
One of the rear axle tubes on mi series looks as though its substantially rotted, I'd say about 3mm down, and its right up against the diff (salisbury), I remembered a long time back welding on a piece of tube to a classic rear axle for the mot, is this still an acceptable practice for the mot?.
Would there be an issue if I welded a plate to both the axle tube and the diff outer casing?, as the tube has rotted right up against the diff housing.
Thanks.
Would there be an issue if I welded a plate to both the axle tube and the diff outer casing?, as the tube has rotted right up against the diff housing.
Thanks.