Benny_Boy said:

So today's job was to replace the A-Frame ball joint and fulcrum bracket. All was going well till it came to reattaching the arms to the bracket. The holes don't line up! It's like the new unit has slightly different geometry and/or requires a different mounting bracket on the rear axle to make everything line up.

Now the unit I purchased with my hard earned pennies was a DA1129ULTRA from Paddocks. https://www.paddockspares.com/catalogsearch/result/?q=DA1129ULTRA. I have no idea what the old one I took off was - it came with the vehicle, but it was knackered. If I was a betting man I'd say it was these (OEM DA1129) http://www.paddockspares.com/fulcrum-bracket.html, but it's a complete guess as it was so mullered.

There are some photos of my issue on Flickr. https://www.flickr.com/x/t/0097009/photos/big_bad_ben/shares/1c35C7/
Help please!

Click to expand...

Benny_Boy said:

So I've spent most of the evening online trying to see if I need to replace anything else and I can't see anything. Numerous sites stock this part and nowhere can I see mention of needing to change any other component to fit it. Most sites take pride in saying it's a drop in replacement/upgrade. So how do I get it to fit????

So very confused.

Click to expand...

jamesmartin said:

jack the chassis or axle till it aligns

Click to expand...

Benny_Boy said:

I did give that a go, but perhaps not enough. Only gave the rear end 2 or 3 cranks on the ol farm jack. I'll try a few more. Cheers James

Click to expand...