After Philip's issue with his coil pack in southern France, and the long run back up north with one cylinder out, we expected to have to change the Lambda sensor on that side, but as they were both a bit ratty to look at, we replaced both at the same time.
Looking at Hawkeye before the swap, bank 1 was not toggling properly, and looking that was confirmed by the Zavoli software looking at the gas ECU, similarly showing one bank being either down on voltage or not responding.
After the swap, both toggled correctly and almost to the same parameters each time, the reading given by both Hawkeye and the Zavoli software being identical.
He has gone off for a run in it now, but we need it healthy for the weekend as we have a show to go to in Norfolk.
Peter
Looking at Hawkeye before the swap, bank 1 was not toggling properly, and looking that was confirmed by the Zavoli software looking at the gas ECU, similarly showing one bank being either down on voltage or not responding.
After the swap, both toggled correctly and almost to the same parameters each time, the reading given by both Hawkeye and the Zavoli software being identical.
He has gone off for a run in it now, but we need it healthy for the weekend as we have a show to go to in Norfolk.
Peter
