Z

Zeph

New Member

• Jul 19, 2008

• #1

Hi,

My waterpump went the other day, so I ordered a new one plus a new P gasket, I read the threads on replacing the waterpump and they all say that the belt tension will hold the pulleys whilst undoing the bolts.

I've tried this but the pulleys just spin ?

Can anyone suggest the best way to do this ?

 

Z

Zeph

New Member

• Jul 19, 2008

• #2

Update:

Managed to get the waterpump pulley and the belt tensioner off, but the power steering pulley bolts wont budge and are starting to round off.

 

Trewey

Cockernee, Pasty munchin bastid.

• Jul 19, 2008

• #3

why do yer wanna take yer PS pump pulley off, if yer changin the water pump?

 

Z

Zeph

New Member

• Jul 19, 2008

• #4

Treworgey 90 said:

why do yer wanna take yer PS pump pulley off, if yer changin the water pump?

Click to expand...

Sorry, I should have mentioned it's a 300tdi, the ps pulley has to come off to get at the water pump bottom bolt.

 

Trewey

Cockernee, Pasty munchin bastid.

• Jul 19, 2008

• #5

Zeph said:

Sorry, I should have mentioned it's a 300tdi, the ps pulley has to come off to get at the water pump bottom bolt.

Click to expand...

OK, if you say so - I'm not familiar with 300's.

The only other thing I can suggest is to get a big pair of stillsons on the pulley, which will damage it, then buy a new pulley (shouldn't be too expensive).