Individual

New Member

• Sep 27, 2009

• #1

Hi all, I think the VC is on it's way out so I'm thinking of taking the prop off for a short time, Ive had a look on here and some seam to take all the prop off and others only take the rear off or is it me that as not understand it :confused2:.

How easy/hard is it to take the prop off and what it involved, i do understand cars a little

Any help would be great thanks Dave.

 

C

ccoaton

New Member

• Sep 27, 2009

• #2

Hello..
Its as easy to take a section out as it is to remove the whole thing.
5-6 bolts at rear axle,.Be sure to put a mark were the rear drive and prop meet this is so you can put it back in the same position..
Next the 6-7 bolts up at the IRD remove those,.Mark aswell..
Next the 4 bolts holding the Prop bearings 2 in each,.Use axle stands to support so it does'nt fall on you..
Thats it

Hope this helps.......:welcome2:

 

Individual

New Member

• Sep 27, 2009

• #3

That's great ccoaton, Thanks for your quick reply, how long do you think it should take me to do it. (average time) Cheers.

 

C

ccoaton

New Member

• Sep 27, 2009

• #4

Alow yourself about 30 mins..

 

Individual

New Member

• Sep 27, 2009

• #5

ccoaton said:

Alow yourself about 30 mins..

Click to expand...

thanks