Yannis

Yannis

Active Member
right now that my engine is back in the car i have found that basicley its a bit F&*k3d. I need to find a recon as i dont have the time to do it my self! does any one know of where i can get my mitts on one? or who supplys them?
cheers yannis
 
Talk to Sean on here he may have a 19J 2.5TD engine for sale

Or google landrover 2.25 reconditioned engine. also try turners
 
arr i would. i was looking at a v8 but being a young lad and all, i wont get insured if i have an engine in there that is diffrent spec to the original
 
Yannis said:
arr i would. i was looking at a v8 but being a young lad and all, i wont get insured if i have an engine in there that is diffrent spec to the original
Click to expand...

i've got one of thems as well (could have an empty garage at this rate)

what's yer old engine doing wrong ?
 
ere Red, has that 90 your thinking of buying got a dash in it ? as i've got a couple of instrument panels ere not doing much
 
well the crank shaft is well gone u can hear it banging about! piston rings are giving me realy low compresion and one of the 3 bearings is probs floating around in my sump about now!
 
Yannis said:
well the crank shaft is well gone u can hear it banging about! piston rings are giving me realy low compresion and one of the 3 bearings is probs floating around in my sump about now!
Click to expand...

plenty of time over xmas to get that sorted, better than watching the sound of muzac again
 
nope i work on a farm.. we dont have "time" over christmas.. thats why im going for a recon as it will be quick. well a day at most!
 
Sean said:
ere Red, has that 90 your thinking of buying got a dash in it ? as i've got a couple of instrument panels ere not doing much
Click to expand...

Yes everythings there apparently. just needs putting back together.
 
i gorra 2.5 na lump i am considering getting rid of - complete with all ancillaries.

pm me if yu are interested.
 
right i am going to go with an engine from withams! is it difficult to fit the 12v alternator to a 24v engine? and as the engine has an oil cooler and i dont have the oil rad can i just put a bit of pipe going from the out to the in on the pump outlets?
 
send paulhumphries a msg he had a 5 bearing engine up for £100 the other day on here, was very tempted myself but have too much to do at the momment.
 
Yannis said:
right i am going to go with an engine from withams! is it difficult to fit the 12v alternator to a 24v engine? and as the engine has an oil cooler and i dont have the oil rad can i just put a bit of pipe going from the out to the in on the pump outlets?
Click to expand...

The correct oil cooler set up has the pressure release valve in the pipework rather than the oil pump. There are probably people around on this site who cab tell you if you need to do something about that, and how easy it is.
 
You must log in or register to reply here.

Similar threads

H
Recommend Recon engine supplier 3.0 sdv6
Replies
11
Views
1K
Hedge cutter
H
P
Length of accelerator push/control rod (Series 2)
Replies
4
Views
243
pabloako
P
B
Chassis replacement on Air Portable series 3
Replies
3
Views
2K
yfo866
yfo866
T
Custom wiring: Why does my land rover not start?
Replies
5
Views
586
Tony Monsantoe
Tony Monsantoe
S
throttle linkage problem
Replies
5
Views
373
sprie
S