S

Scoddy

Guest

• Jan 21, 2006

• #1

How can I tell if the rearend of my 2001 GMC 3/4 ton 4x4 is going??

 

B

.boB

Guest

• Jan 22, 2006

• #2

Scoddy wrote:
> How can I tell if the rearend of my 2001 GMC 3/4 ton 4x4 is going??
>

Reach up and grab the drive shaft, just ahead of the pinion. Try and turn it.
Backlash is measured in thousands of an inch. If you can feel it move, it's too much.

--
..boB
On Order: 2006 FXDI, Red.
1997 HD FXDWG - Turbocharged Stolen 11/26/05 in Denver
1HD1GEL10VY3200010 CO License J5822Z
2001 Dodge Dakota QC 5.9/4x4/3.92
1966 Mustang Coupe - Daily Driver
1965 FFR Cobra - 427W EFI, Damn Fast.

 

T

TheSnoMan

Guest

• Jan 22, 2006

• #3

..boB wrote:
> Scoddy wrote:
>
>> How can I tell if the rearend of my 2001 GMC 3/4 ton 4x4 is going??
>>
>
> Reach up and grab the drive shaft, just ahead of the pinion. Try and
> turn it. Backlash is measured in thousands of an inch. If you can feel
> it move, it's too much.
>


Not so. THe "backlash it measured in thousandths at the ring gear not at
pinion rotation. Also blacklash does not nmean much is rear end is
quiet. A sure sign is a noisy rear axle that changes pitch under load too.

--

-----------------
www.thesnoman.com

 

M

Miss Anne Thrope

Guest

• Jan 22, 2006

• #4

Look out the windows. If you see trees and houses going
by...................then your rear end is going.

 

K

Keep YerSpam

Guest

• Jan 23, 2006

• #5

Miss Anne Thrope wrote:
> Look out the windows. If you see trees and houses going
> by...................then your rear end is going.
>

LMAO!