B

Benn01

New Member

• Dec 6, 2013

• #1

I had to replace my rear door lock mechanism...and of course the lock barrel on the old lock is ruined.

What lock barrel goes in the 02-on rear door lock?

I have a spare long lock barrel from a recent defender (past 5 years) and it doesn't fit. I am thinking maybe it is for the side door. Are the barrels different from side door to rear door?

Any help would be really appreciated as I can't even figure out the part to order!

 

Oldseadog

Well-Known Member

• Dec 7, 2013

• #2

Have a word with Rimmer Bros 01522 568000 and they should be able to advise you.

 

B

Benn01

New Member

• Dec 7, 2013

• #3

thanks will give them a call.

 

B

Benn01

New Member

• Jan 14, 2014

• #4

Anyone have any advice? The parts places are a bit stumped. It is a 2002-on rear door lock with remote central locking.

I ordered the below part (I was going to sell of the unused bits) which does not fit in the current rear door lock with remote central.

CWB500640

Is CWC500190 what I am after?

 

B

Benn01

New Member

• Jan 20, 2014

• #5

anyone?

 

Oldseadog

Well-Known Member

• Jan 20, 2014

• #6

What did Rimmers advise?

 

Tim4x4

Well-Known Member

• Jan 21, 2014

• #7

Benn01 said:

I had to replace my rear door lock mechanism...and of course the lock barrel on the old lock is ruined.

What lock barrel goes in the 02-on rear door lock?

I have a spare long lock barrel from a recent defender (past 5 years) and it doesn't fit. I am thinking maybe it is for the side door. Are the barrels different from side door to rear door?

Any help would be really appreciated as I can't even figure out the part to order!

Click to expand...

I have a 2001 Defender which I have just changed all lock barrels 3 off but purchased 4 barrels one as a spare.
The part number for the 4 set is MTC6505, this is listed as suitable for all defenders from 1983 to 2006.
Just a thought on the end of the barrel is a removable portion which you have to swap over from the old barrel to the new one (rear door just remove from an old barrel if previously used on side entry door as it is not required on rear door).
This is completed by depressing the spring loaded plunger and withdrawing the part, if you look at http://http://www.brit-car.co.uk/product.php/240508/4919/lock_4_barrels___2_keys_def_s111 t you can clearly see the plunger on the end of the barrel the brass bit.
My apologies if you are aware of this.

 

Last edited: Jan 21, 2014