On Sun, 04 Jul 2004 19:45:22 GMT, "Patricia McCarthy"
<pm001g6455@blueyonder.co.uk> wrote:
>where will I find diagrams for replacing the ignition switch. AA bloke took
>it off an the manual is very concise. not sure what screws there was they'
>ve disappeared. got the two bolts for the clamp (sheer off). I need any
>diagrams of the ignition switch, I have got the Haynes manual.
>
>from a puzzled lady owner.
>
>Patsy Mc
>
What do you want to know? Mine is in pieces right now, so real
pictures are easy to come by!
You need two shear bolts for the clamp, as you say. With a bit of
careful tapping with a punch you CAN reuse the old ones though.
The switch just wraps around the column and the electrical switch
slots over the end. Then put the plastic shroud back on with three
small philips screws. Flip up the plastic panel and turn two (or is
it three?) plastic turn screws and the job is done.
Then you find the little plastic trim panel that fits around the key
slot in the centre console that you forgot to put back on...
--
Tim Hobbs
'58 Series 2 88" aka "Stig"
'67 Series 2a 109" aka "Ernie (FOR SALE)
'77 101FC Ambulance aka "Burrt"
'95 Discovery V8i aka "The Disco" (FOR SALE)
03 Volvo V70
My Landies?
http://www.seriesii.co.uk
Barcoding?
http://www.bartec-systems.com
Tony Luckwill web archive at
http://www.luckwill.com
