generalfarfar · Mar 22, 2013

Hi!

I am going to change the engine in my P38 due to timing chain failure to a similar engine that has gone less miles.

Was wondering if there's anything I should think of before doing this procedure?

Have some questions:
1. As I change the engine, it's recommened to change the fluids right? Engine oil, transmission oil?
2. Thinking of the turbo, how many miles do you think it'll keep up? Thinking of changing mine.
3. Is there a guide to change the engine? Heard from mechanics that it should be on a lift and the engine goes down, not up?

Regards, Thanks for the help!!!

wammers · Mar 22, 2013

Change all fluids on new engine. Engine comes out through top cannot go down. Check that turbo spins freely with no wobble on shaft. Engine removal detailed in RAVE see my "How to" for download. Or search the site.

Saint.V8 · Mar 22, 2013

I think he needs a new mechanic too if he has been advides to drop the engine....I mean it is not like there is a solid beam axle in the way....oh no wait a minute there is....!!

generalfarfar · Mar 22, 2013

wammers said:
Change all fluids on new engine. Engine comes out through top cannot go down. Check that turbo spins freely with no wobble on shaft. Engine removal detailed in RAVE see my "How to" for download. Or search the site.

Ok thanks for the help! Ok, have download RAVE got a bunch of files but don't really know how to install or view the manual, could you please link?

Regards

generalfarfar · Mar 22, 2013

Saint.V8 said:
I think he needs a new mechanic too if he has been advides to drop the engine....I mean it is not like there is a solid beam axle in the way....oh no wait a minute there is....!!

Hehehe, will certainly forward that message to the "mechanics"

Regards

wammers · Mar 22, 2013

generalfarfar said:
Ok thanks for the help! Ok, have download RAVE got a bunch of files but don't really know how to install or view the manual, could you please link?

Regards

If you did the download from my link you will need to unzip them. If you have done that and as you say got a load of files just double click on the RAVE logo within those files to open it. Send that LOGO to desktop as a short cut. Good luck.

generalfarfar · Mar 22, 2013

wammers said:
If you did the download from my link you will need to unzip them. If you have done that and as you say got a load of files just double click on the RAVE logo within those files to open it. Send that LOGO to desktop as a short cut. Good luck.

Didn't download from you, do you have the link somewhere?

Regards

Datatek · Mar 22, 2013

generalfarfar said:
Didn't download from you, do you have the link somewhere?

Regards

Go to the "how To" section at the top of the page, it's in Wammers thread.

generalfarfar · Mar 25, 2013

Just got the car, was attempting to start it to check if the engine sounds or anything but couldn't get the engine to start.

Removed the fuse from position 11, is there anything more I should do?
The alarm don't seem to work, can only unlock from the right hand door (LHD), the some of the locks on the door doesn't seem to work.

When I tried to start the car it was connected to a another car because of bad battery

Btw. is there any page in the RAVE where they show how to change engine?

Thanks for the help!

Regards

Datatek · Mar 25, 2013

generalfarfar said:
Just got the car, was attempting to start it to check if the engine sounds or anything but couldn't get the engine to start.

Removed the fuse from position 11, is there anything more I should do?
The alarm don't seem to work, can only unlock from the right hand door (LHD), the some of the locks on the door doesn't seem to work.

When I tried to start the car it was connected to a another car because of bad battery

Btw. is there any page in the RAVE where they show how to change engine?

Thanks for the help!

Regards

Nothing will work correctly with a poor battery, they don't like being jumped.
Fuse in position 11 is for towing, fit it to tow it.

generalfarfar · Mar 25, 2013

Datatek said:
Nothing will work correctly with a poor battery, they don't like being jumped.
Fuse in position 11 is for towing, fit it to tow it.

Ok thanks for that, yes took it away, will the gearbox work even if it's in position 11?

Regards

gfromleeds · Mar 25, 2013

generalfarfar said:
Ok thanks for that, yes took it away, will the gearbox work even if it's in position 11?

Regards

No the fuse in position 11 is to disable the gearbox so it can be towed
This fuse must be removed before atempting to drive

Saint.V8 · Mar 25, 2013

generalfarfar said:
Ok thanks for that, yes took it away, will the gearbox work even if it's in position 11?

Regards

Fuse 11 will make the Transfer Box select Neutral...you will still be able to select a drive gear through the main box, but you will get no drive at all as the transfer box is in neutral!

generalfarfar · Mar 25, 2013

Ok thanks for the help!

If it's of any interest I could attach photos for you to follow the whole change.

Regards

Saint.V8 · Mar 25, 2013

generalfarfar said:
Ok thanks for the help!

If it's of any interest I could attach photos for you to follow the whole change.

Regards

Definatly write a how to with pics...

generalfarfar · Mar 28, 2013

Waiting for the engine to arrive I've been trying to start the old one to look if I hear some noises. But it don't seem to even want to start. The battery was completely drained, so I've had it on charge for 2 days now. When I'm trying to start the car it says engine disabled, press key(?). Trying to press the buttons on the key but nothing happens.
Also the central lockning doesn't seem to work as I unlock the car from drivers side.

Any idea?

Regards

wammers · Mar 28, 2013

generalfarfar said:
Waiting for the engine to arrive I've been trying to start the old one to look if I hear some noises. But it don't seem to even want to start. The battery was completely drained, so I've had it on charge for 2 days now. When I'm trying to start the car it says engine disabled, press key(?). Trying to press the buttons on the key but nothing happens.
Also the central lockning doesn't seem to work as I unlock the car from drivers side.

Any idea?

Regards

EKA code needed or talk to Mozzy..

Grit Valve · Mar 28, 2013

Datatek said:
Nothing will work correctly with a poor battery, they don't like being jumped.
Fuse in position 11 is for towing, fit it to tow it.

Thought it was remove it to tow it, removing it selects Neutral

Datatek · Mar 28, 2013

defender300td1 said:
Thought it was remove it to tow it, removing it selects Neutral

I wonder how an open circuit drives the motor to neutral

Fuse in to select neutral.

Grit Valve · Mar 28, 2013

Datatek said:
I wonder how an open circuit drives the motor to neutral

Fuse in to select neutral.

Ok thought my Manuel said remove before towing . Been a long time since I read it just checking

New Member

No longer with us, RIP

Dyed-in-the-wool 100% RR Junkie

New Member

New Member

No longer with us, RIP

New Member

Well-Known Member

New Member

Well-Known Member

New Member

Well-Known Member

Dyed-in-the-wool 100% RR Junkie

New Member

Dyed-in-the-wool 100% RR Junkie

New Member

No longer with us, RIP

2000 4.6 Vouge

Well-Known Member

2000 4.6 Vouge

Similar threads