T toby III New Member Nov 28, 2008 #1 quick- and quite possibly silly question. i'm going on the hunt for some rangie diffs for my series 3. At the hub end the halfshafts on my series are 24 spline. I need 24 spline diffs then right? toby
quick- and quite possibly silly question. i'm going on the hunt for some rangie diffs for my series 3. At the hub end the halfshafts on my series are 24 spline. I need 24 spline diffs then right? toby
doobie Active Member Nov 28, 2008 #2 no, the diff end should be 10 spline. diff's from 200tdi disco's also fit and there's usually loads of them in bits at the scrappers!!
no, the diff end should be 10 spline. diff's from 200tdi disco's also fit and there's usually loads of them in bits at the scrappers!!
G-man BBQ king Nov 29, 2008 #4 i hope you have a rover rear axle then as ye cant do it on a sailisbury
T toby III New Member Nov 29, 2008 #5 i think they are rover but how do i tell the difference? cheers toby
metallicachick86 New Member Nov 29, 2008 #6 got an look at them, if the rear diff plate dont look like the front one (generally round) then u have a salisbury instead of rover
got an look at them, if the rear diff plate dont look like the front one (generally round) then u have a salisbury instead of rover