silkything1

New Member
i have a original radio cassete in my 1999 2.5 range rover i must have put wrong code in to many times now when i press the on button i can only get the four bar lines and i am unable to put the code num in. Any ideas please.
 
Do you have right code now? Try reset as above or do internet search to see if there is a reset procedure. Then phone JLR dealer, give your name and veh reg. They will give you the original code, for original system
 
I think - could be wrong - but powering off may not help....leaving it powered on for a set amount of time will.

From memory - which is poor - if you enter the wrong code X amount of times it will time out for Y amount of time, another wrong entry will double the timeout, and then again if another wrong entry is put in and the timeout increases up to 30 minutes maximum I think....

You then have to leave it powered on for the relevant amount of time before it will allow you to put the code in again.

Research is key!

EDIT: https://www.pistonheads.com/gassing/topic.asp?t=278190
 
Make sure you have the correct code and then follow Saint V8 s advice above but if you mess it i up as I have done before leave it powered up and the first lock out is about 5 mins.
 

Similar threads