Mikewilliams
Active Member
What gets mounted onto these brackets on the front of the crossmember?
Mikewilliams
Active Member
Mmmm, this is a new one.
jamesmartin
Well-Known Member
for fitting an under tray
Mikewilliams
Active Member
Thanks james,
Well i wont be fitting an undertray so i’ll be using them as mounts for my exhaust
Well i wont be fitting an undertray so i’ll be using them as mounts for my exhaust
Are you sure you want the exhaust to hang that low? It might be vulnerable to fouling on obstacles, or even kerbs and speedbumps. My exhaust hangs on brackets that go on the upper bolts of the detachable crossmember which enables it to sit higher up between the chassis rails out of the way.
Mikewilliams
Active Member
I wouldn’t be hanging them lower. I will make a bracket that mounts onto those brackets that hold the exhaust more or less the same level as the crossmember
Ah, I see. Should be OK then, if you get the exhaust routed above the crossmember.
