roger352

Active Member

• Jun 12, 2012

• #1

Hi

Ive been thinking about my inlet manifold. The turbo sits at one end of the manifold. It will feed the first 2 cylinders very well but is feeding the front 2 as well. Surely it would feed all cylinders better if the turbo was positioned in the middle of the manifold?. Can you get a centre fed manifold?.

Any help would be appreciate

Roger

 

jamesmartin

Well-Known Member

• Jun 12, 2012

• #2

not as i know of but doubt it make much difference as turbo creates pressure in manifold that availible when valves open ,

 

E

eightinavee

Well-Known Member

• Jun 12, 2012

• #3

Fit a Hiclone in each inlet port - that will smooth it out and gain 100BHP.....

 

DiscoPol

Well-Known Member

• Jun 12, 2012

• #4

eightinavee said:

Fit a Hiclone in each inlet port - that will smooth it out and gain 100BHP.....

Click to expand...

I hear it was 100bhp per cylinder is this right

 

P

Philip0603

New Member

• Jun 15, 2012

• #5

OOOH!!!! 100BHP per cylinder, :5bangelsad2::5bangelsad2::5bangelsad2: Heaven.

 

lyron

Active Member

• Jun 19, 2012

• #6

where do you get these cyclones from DO TELL!!:behindsofa::behindsofa:

 

ScratchyDom

Well-Known Member

• Jun 19, 2012

• #7

I've got some. Just send me £176.52 for each one you want, £78.90 for shipping, plus VAT and a Mars Bar and I'll get them straight over to you. Honest...