90maniac

Active Member
Hey i have recently purchased a set of 1996 discovery 1 24 spline axles, they have solid discs on and then calipers to match but i would like vented grooved and drilled discs, is this just a simple swap of calipers or impossibe?
Cheers steve
 
I don't no why some body would want drilled and grooved discs on a landie.when your off road if you got mud or grit in 1 ov them holes surely it wudnt take long to ruin the pads or disc?I'd just go for normal discs then ebc green pads
 
I once glazed the brakes over and s**t myself in the old landy my own fault lol so i just fancied these
 
Just take drilled non ventilated ones, reduces brake fade and only costs you new discs and not calipers on top.

Although if you are having difficulty finding vented calipers that are any good S/H try looking for the kit to make standard calipers vented ones.
 
or do what I did, as I wanted vented discs and went down the route of switching the setup to defender 130 vented discs and calipers as the claipers are larger so bigger pads ;)
 
I followed Stu's advice, went for the defender 130 calipers (i got vented and crossdrilled discs purely because they were cheaper than anything else) and although it took about 4 goes at bleeding they're now bedded in and the difference is jaw dropping. Pedal feel is much improved, travel is reduced by 4x what it was and I can easily lock the wheels on 33" mud terrains. Go for it.
 
My garage told me other day 130 calipers wouldnt fit so i passed the offer on some and started buying disco brakes
 
I have a brand new set of front calipers the twin feed type if they is any good to you. Solid disc though, I believe.
 
Plus just buying new calipers anyway as mine look abit old and cba putting them on and finding out they dont and changing anyway
 
No im looking for vented mate cheers anyway, these calipers where off an 04 130 rest of the world with a 300tdi insted of the td5 it should have
 
Here you go.....from an old thread of mine.....


Got my stuff from Island 4x4 (Kent) Ltd - 01622 693884 - were really helpful in sorting out everything I needed, and this is what I got..

1 x Front Brake Pads 110/130 86- - Part No STC2952 - £12.49
1 x Front Brake Discs (2) Drilled & Grooved 110/130 1994 on - Part No DA4602 - £44.16
1 x Front Brake Pad Fitting Kit (Vented Discs) - Part No STC8575 - £2.49
1 x Caliper Front LH 110/130 94- (Vented) - Part No SEB500470 - £49.99
1 x Caliper Front RH 110/130 94- (Vented) - Part No SEB500460 - £49.99
5 x Front Brake Caliper Bolt Metric (Double Hex) - Part No FTC3375 - £2.15

Total £161.27 plus VAT £32.25 = £193.52 (plus free delivery)


Might help with ideas of what you can do.
 

Similar threads