L

landydude

New Member

• Feb 14, 2009

• #1

Oh happy days .It would seem that a previous owner has pulled the thread in the bellhousing which holds the slave cylinder !!!!!. Can anyone help with the size of a helicoli style insert which i suppose im gonna have too bite the bullet and order.

 

david451

New Member

• Feb 14, 2009

• #2

landydude said:

Oh happy days .It would seem that a previous owner has pulled the thread in the bellhousing which holds the slave cylinder !!!!!. Can anyone help with the size of a helicoli style insert which i suppose im gonna have too bite the bullet and order.

Click to expand...

If it were me I would just drill both to the next size and tap it.

 

The Mad Hat Man

Well-Known Member

LZIR Despatch Agent

• Feb 14, 2009

• #3

if yu know wot thred the bolt is - thats the size helicoil you need.

 

BOOMER

Bloke from Dorset

• Feb 14, 2009

• #4

Drill it all the way through and use a nut and bolt, that's if you can get a nut on the other side that is..... :doh:

 

steve2286w

Well-Known Member

• Feb 15, 2009

• #5

either way your gonna need the right tapping drill size,

link to zeus book below

http://www.green-oval.com/data/zeus.pdf

 

L

landydude

New Member

• Feb 17, 2009

• #6

oh HAPPY DAYS m8 helicoil kit saved the day. The ultimate discovery of that god blessed australian outback. Won't need to be going back to that again....

 

jonteewilly

New Member

• Feb 17, 2009

• #7

you what!!!