Yes as I'm replacing these brackets as they snapped off, but only loosened the 2 bolts not removed as there is a bearing or pin under here so I've been told and to take care when removing bracket?????had you loosened the top pin bolts holding brake pipe bracket
you should have placed a jack under the bottom of swivel before slackening those bolts ,the swivel has dropped down leaving a gap between seal and the ball if your lucky it will reseal when you tighten them back upYes as I'm replacing these brackets as they snapped off, but only loosened the 2 bolts not removed as there is a bearing or pin under here so I've been told and to take care when removing bracket?????
yes all the time the top 2 bolts are loose or removedSo should I be supporting this whilst wheels are off as I have front end on axle stands whilst waiting for parts to re do brakes and brackets plus pipes and hoses??????
any ep90 or thickerRight ok cheers, I've tighten up and cleaned the area up and placed a drip tray underneath to see if it leaks anymore. Any preference on what to top up with or just go by what haynes suggests if it does, best get one as well....doh