Grayo
Active Member
Hi All,
I plan on changing my prop bearings soon as one of them is making a noise. Both bearings were changed 15 months ago. I watched the guy do this job so am pretty confident I can do it myself. The question is what size is the long reach socket needed to go over the splines on the shaft to tap the new bearing back on.
Thanks
Grayo
I plan on changing my prop bearings soon as one of them is making a noise. Both bearings were changed 15 months ago. I watched the guy do this job so am pretty confident I can do it myself. The question is what size is the long reach socket needed to go over the splines on the shaft to tap the new bearing back on.
Thanks
Grayo
Last edited: