L

lambchopper

New Member

• Feb 10, 2008

• #1

Bit of an issue , may have been like it for a while , but only just noticed ,

When I press the brake pedal with lights off , instrument panel lights up and so do main beam lights ?????

Brake lights work as normal ,

This happens when I am stationary , either ignition or engine on , any ideas ?

Regards
Tony

 

S

slob

Well-Known Member

• Feb 10, 2008

• #2

issue?? anyway have you checked to see if any wires have bin worn through with the movement of yer brake pedal?

 

L

lambchopper

New Member

• Feb 10, 2008

• #3

I guess my concern or issue is , if it's happening when I'm moving , when I brake will someone think I'm flashing them to let them out etc etc and cause a dangerous situation

Thanks for the reply will check the wires

 

ming

SPACE TWOT

• Feb 10, 2008

• #4

lambchopper said:

I guess my concern or issue is , if it's happening when I'm moving , when I brake will someone think I'm flashing them to let them out etc etc and cause a dangerous situation

Thanks for the reply will check the wires

Click to expand...

get it sorted afore you use it again earthling , check wot slob sis , also all earth connections . . . . . . .i will ask porky to check out possibilities fer yer , eeze busy fixin the rockits warp speed modulator, so e mite be awhile yet [eeze er furra bread]. . . .

 

I

ianda12

Active Member

• Feb 10, 2008

• #5

Check the earths on the brake lights, if they are no good they could be back feeding through another circuit causing them to come on. Bad earths cause all sorts of wierd things to happen.

 

S

slob

Well-Known Member

• Feb 10, 2008

• #6

if that wur the case the brake lights wouldn't work as normal. they would be dimmer

 

T

tess

Member

• Feb 15, 2008

• #7

lambchopper said:

Bit of an issue , may have been like it for a while , but only just noticed ,

When I press the brake pedal with lights off , instrument panel lights up and so do main beam lights ?????

Brake lights work as normal ,

This happens when I am stationary , either ignition or engine on , any ideas ?

Regards
Tony

Click to expand...

I had exaclty the same problem & its a bad brake bulb, the filaments inside were touching each other

Tess