mlbirk

New Member
I have a 2001 4.6 HSE that I just got out of the shop for head gasket repairs. The left head gasket blew causing the upper radiator hose to explode. That was quite an experience.

After $3,800 for new gaskets, head milling, hoses, belts, water pump, thermostat, plugs, plug wires and misc other items, I got the RR back and now have a rolling message that says;

"LF Window Not Set"
"RF Window Not Set"
"Sunroof Not Set"

All work just fine with the exception of the "one touch" operation which is what I think the messages are about. The power was disconnected when the engine repairs were made and I have a feeling that there is a simple "window re-set" procedure to activate the "one touch" operation but can't seem to find any information on it.

Anybody got any ideas? They would be greatly appreciated.
 
Read your owners manual.
Press the window down button and hold it for 5 seconds after it is fully down, immediatly press the window up button and hold it for 5 seconds after it is fully up, you should then get a message " window set" repeat for the other window and BOTH THE TILT AND SLIDE FUNTIONS OF THE SUNROOF.
 
hello mate you have to open and close the window fully, repeat it about 3 times and it should re-set it self not sure about sunroof tho but i expect it to be the same
 

Similar threads