D

defrayne

New Member

• Aug 30, 2009

• #1

just changed the pump(new) and steering box (recon) on my 110. ive got no power steering ! any ideas?

 

Pikey

Dummy Ejection Facilitator..

• Aug 30, 2009

• #2

If the pumps spinning & the hoses areall connected properly Then either no fluid or an airlock?

 

buckshot

Well-Known Member

• Aug 30, 2009

• #3

defrayne said:

just changed the pump(new) and steering box (recon) on my 110. ive got no power steering ! any ideas?

Click to expand...

jack front wheels off the ground and keep turning wheel back and forth should purg the air from system

 

D

defrayne

New Member

• Aug 30, 2009

• #4

ive got fluid... it may be an airlock but i've been trying in the bloody rain all day to bleed it! its almost like the pump is not working. i followed the instructions that came with the box with regards to bleeding ive got fluid coming out of the bleed nipple on top of the box...

 

D

defrayne

New Member

• Aug 30, 2009

• #5

is there any way to check the pump? i've no pressure gauge which is probably good as i wouldn't know what to do with it..... gonna have one last try at jacking up and side to side (AGAIN!)before bed time. my neighbours hate rover v8s!!!!