www.landyzone.co.uk
Nothing I can obviously see, the diaphragm is in one piece and the spring seems fine. The only but that I would question is every PCV I’ve seen has a plastic reinforcing ring under the diaphragm. My OE one literally is the spring, diaphragm and plastic cover. If this is normal then I’m happy, if a part is missing then I need to swap it out
I understand that yes, and see picture below as this is the difference. I was just hoping that someone had actually managed to to buy and fit one that is the correct size. I did spot that it says suitable for 2008-2012. Mines an 07 but I’m sure the cover/PCV would be identical??I note you have another post/thread regarding the same, and you purchased, using a link someone on here gave you, always best to do your own homework if not 100% sure.
Freelander 2 (LR2) - PCV
Evening all, So I’ve just diagnosed a faulty EGR cooler which has given headgasket symptoms. Prior to removing it the top side of the engine at the rear was covered in oil which appeared to have come from the intake pipe joint at the rear left. I’m led to believe that a fautly PCV can be the...
Quite a difference in those disco ones look similar to yours but who knows if it fits ?
If it looks to be working, then I can't see the point in changing it. What makes you believe it's faulty?Nothing I can obviously see, the diaphragm is in one piece and the spring seems fine. The only but that I would question is every PCV I’ve seen has a plastic reinforcing ring under the diaphragm. My OE one literally is the spring, diaphragm and plastic cover. If this is normal then I’m happy, if a part is missing then I need to swap it out
