Hi
Fairly new to owning a 2003 Disco 2.

My passenger window seems to move out of position on opening and also on closing. It does fully open and close but doesn't stay in the runners if that makes sense. It seems to move out slightly then back in again.

Before I take the door trim off, is this likely to be an adjustment of some sort or will I be looking at a new regulator?

I don't like removing door trims more than needed, so if it's likely to be a regulator, I'd rather get one and do the job in one go.


Thanks in advance

more than likely regulator,it allways is

Mine did the same and when I took the door card off
the three bolts that hold the motor etc in place had
came loose. I closed the window fully then tightened
the bolts up and all seems fine....fingers crossed.