Hiya there,

I've had a look at microcat, but it's not there, so I was wondering if anyone knew where I could get the correct stud that screws in to the timing case, and that has the idler pulley on it. It's got 10mm of thread on the side that screws in to the case, 17mm of thread on the other side, and it's 30mm overall. Unfortunately, mine's a bit screwed up after I undid it. It stripped out a helicoil insert that the previous owner had used, and it's knackered the thread up a little bit, to the point that I can't get an m10 die on there _nicely_, and I'd just like to have a fresh one!

Any help appreciated!