cornishboater

cornishboater

Well-Known Member
Does anyone know the pinout/description of the 2 connectors beside the inertia switch in the RH front kick panel (RH Drive). I did have a picture way back when of the colour codes and the connector.
I have soldered the connectors in the LH kick panel a few years back and want to do the same. I had in the back of my little head that one wire was relevant to the EAS inhibit switch (which is not working apart from the brake pedal)

I have hunted through RAVE but cant seem to find the descriptor

Cheers
 
The diagrams are in the 1997 version of RAVE.

1683020826390.png




1683020938385.png
 
romanrob said:
Eas inhibit goes behind the LH kick panel. From memory, one of the connectors on the RH kick panel carries the ac/ hvac
Click to expand...
Cheers, that connector burnt out a couple of years ago and I soldered it the same as the ones on the LH side, the only one I am not sure of is the one beside it.
 
the original size is 4128 x 4648 px but the site reduced it to 1421 x 1600 px not a lot I can do about that
 
Unusual to see colours on a P38 diagram, but as I said it's too small to make out detail and will not enlarge on my computer.
 
mystery said:
the original size is 4128 x 4648 px but the site reduced it to 1421 x 1600 px not a lot I can do about that
Click to expand...
Can you share the original file using Google Drive or Dropbox ? Ideally the Visio, or whatever software was used.
 
Datatek said:
Unusual to see colours on a P38 diagram, but as I said it's too small to make out detail and will not enlarge on my computer.
Click to expand...

If you open the attached pic/file then press download on the menu top left of pic. then open the file you can enlarge it alot more.

J
 
its a PNG image it's the only images I find that doesn't leech colours over time ,the draw back is they are usually too large to post some times and compression software size reductions is limited
 
marjon said:
If you open the attached pic/file then press download on the menu top left of pic. then open the file you can enlarge it alot more.

J
Click to expand...
Yes it enlarges but is just a blur. I still say it doesn't look like any P38 schematic that I have seen because of the colours which are like those used on the L322.
 
You must log in or register to reply here.

Similar threads

cornishboater
P38A EAS signal
Replies
3
Views
829
pwood999
pwood999
cornishboater
P38A Simple EAS query
Replies
14
Views
813
pwood999
pwood999
G
P38A 99 4.6 Thor with ABS&TC lights, no speedometer
Replies
7
Views
917
Andy Burrell
Andy Burrell
J
Classic LIGHT SWITCH ISSUES 1982 3.5 V8 RANGIE
Replies
13
Views
964
Jim_P
J
JokerUK
Sport MAP/MAPT Sensors on 4.2 S/C
Replies
0
Views
573
JokerUK
JokerUK