L

Landyrote

Member

• Mar 5, 2018

• #1

Hi all Sunday I put a new uj on the car and thus removed front prop did the joint put it back no more vibration yay but !!!!!! Have a tc light on now error message and no speedo , what have I done wrong ?

 

Wazzajnr

Well-Known Member

• Mar 5, 2018

• #2

Are the abs sensors pushed in correctly? Or have you disturbed any wiring to said sensors.
The speedo, tc and abs all use the abs sensors

 

wammers

No longer with us, RIP

Donater

• Mar 6, 2018

• #3

+1 It is hard to believe you have damaged an ABS sensor or wire fitting a prop shaft. But it does appear that you have.

 

Wazzajnr

Well-Known Member

• Mar 6, 2018

• #4

wammers said:

+1 It is hard to believe you have damaged an ABS sensor or wire fitting a prop shaft. But it does appear that you have.

Click to expand...

Jacking it up and letting the axles hang with a cable that's incorrectly routed maybe? I must admit, I thought on first reading he meant he'd done the front cv joints, it was only when I re-read it that I realised it was the prop he'd done.
Note to self: read op carefully in future

 

L

Landyrote

Member

• Mar 8, 2018

• #5

Wazzajnr said:

Jacking it up and letting the axles hang with a cable that's incorrectly routed maybe? I must admit, I thought on first reading he meant he'd done the front cv joints, it was only when I re-read it that I realised it was the prop he'd done.
Note to self: read op carefully in future

Click to expand...

Thanks guys I’ll give it a look over Saturday your the best been in lanzarote I’m stuck without you

 

T

tomcat59alan

Well-Known Member

• Mar 9, 2018

• #6

Your a brave man having a P38 in the Canaries. Getting parts must be a nightmare and expensive, its bad enough for me with an old Clio. And as for the local drivers cannot count how many scars its got from car parks.