Hi everyone, hopefully one of you will be able to help me with this......the wife came home today (after a frantic phone call) with an EAS fault on the dash (the ride height was ok). I popped the bonnet and the pump was not running and felt quite hot but not that hot that i couldnt touch it. I pulled the relay and jumpered across the live input to output and the pump ran. i disconnected the multiplug going to the pump and found voltage on the thin purple black wire, nothing on the thick black and nothing on the thick purple green. with the jumper across the relay terminals i got voltage on the thick purple green, but with the relay in, nothing. i have changed the relay and checked the maxi fuse and fuse 44 all ok. I have also run a jumper off the orange pump wire to earth the thermal cut out and this did not make the pump run either.

Any ideas????

Hi, if you can get down to me in Oxfordshire I can put my computer on it for you - gratis. Regards, Andy