B

barker746

New Member

• Mar 13, 2010

• #1

c/c not working, d/board switch lites when pressed, found + replaced vacuum pipe that was split, but still no joy (its the only thing thats not working,,,,aaarghhh)help please

 

fanatic

RESPECT IS EARNED, BEATINGS ARE FREE ;-)

Forum Sponsor

• Mar 13, 2010

• #2

mine had two brake pedal switches, one for brake lights,one for cruise.
the switch may be faulty or cruise control inverter or ecu down load "rave" from green oval
The Green Oval - Downloads | Land Rover Data

has testr proceedures

 

kooky_guy

Well-Known Member

• Mar 14, 2010

• #3

same problem i've got. You need to go through thr Rave troubleshooting procedure as fanatic suggests.

 

Irishrover

Well-Known Member

• Mar 14, 2010

• #4

The CC fault finding section is very good on RAVE. Just go through it step by step and you will eventually come to the cause and fix. DON'T be tempted to jump a step.
:behindsofa:

 

B

barker746

New Member

• Mar 14, 2010

• #5

sorry peeps my computer skills are totally toss . can i get a WRITTEN MANUAL anywhere? cos i cant use the rave thingy

 

Irishrover

Well-Known Member

• Mar 14, 2010

• #6

Send me a PM with your address and make a small donation to the forum and I'll send you one tomorrow by post.:behindsofa:

 

magictiny

New Member

• Jun 8, 2010

• #7

Irishrover said:

The CC fault finding section is very good on RAVE. Just go through it step by step and you will eventually come to the cause and fix. DON'T be tempted to jump a step.
:behindsofa:

Click to expand...

I have replaced the vacume pipes and the brake pedal switch and it still doesn't work - I have read the fault section on Rave, and it totally bemused me. As the pipes were totally shot, I suspect the next thing to check is the pump has not burned out, is there an easy way to check this without reverting to a multimeter (these also confuse the hell out of me)?