S

steve2905

Member

• Mar 27, 2015

• #1

Hi.
i have modular wheels and 30mm spacers.
i need new tyres soon and want to replace the wheels with a suitable offset / back space to allow the tyre outer wall to remain in the same position.
any ideas?
thanks!

 

Attachments

• 
  20150327_161628.jpg

  281.5 KB · Views: 182

chris mcc

Still fixing it!

• Mar 27, 2015

• #2

Surely you need 30mm extra offset than you have now!

 

lucifus

Active Member

• Mar 27, 2015

• #3

Lol. Find out what size and offset your rims are now. It should be stamped on the inside of the rim.

 

blue beasty

Leaks an prone to bits dropping off

• Mar 27, 2015

• #4

Just remember you need to take 30mm OFF the offset.

Negative offset moves the rim out

 

lucifus

Active Member

• Mar 27, 2015

• #5

It's more than likely you have 0 offset modulars. If they are 16x7 et0 then you want to find some that are et-30. There's plenty of good sites that calculate this for you. Just post what you have and someone can point you in the right direction.

 

S

steve2905

Member

• Mar 27, 2015

• #6

Superb. Thanks guys!

 

S

steve2905

Member

• Mar 27, 2015

• #7

Where abouts on the rim? Is it a wheel off job? Just crawled underneath and cant see anything on any of the wheels?

 

lucifus

Active Member

• Mar 27, 2015

• #8

You'll have to take it off and clean it up no doubt. It may be where it bolts to the hub