M

Mark tate

New Member

• Mar 17, 2023

• #1

Hi all new on this, I have a question, my mechanic removed my auto box on my 4.0 p38. It was to fix real crank seal that was leaking badly. He replaced the box back in situ. Long story shorter!!! It’s not selecting gears. The selector in the cab isn’t very tight, seems sloppy. It reversed after job and drove back in but next day it won’t select gears. Can anyone shed ideas or light on the problem.

 

saxavordian

Well-Known Member

• Mar 17, 2023

• #2

Welcome aboard the SS landyzone for naked wine producing with Landrovers.
Would be worth asking on the range rover section for a better answer.
What was the condition of the autobox oil did they replace it and if so how much.

 

M

Mark tate

New Member

• Mar 17, 2023

• #3

Oil not replaced ! Was thinking of having one of them mobile flushing guys out to do the box ? Not sure

 

saxavordian

Well-Known Member

• Mar 17, 2023

• #4

Mark tate said:

Oil not replaced ! Was thinking of having one of them mobile flushing guys out to do the box ? Not sure

Click to expand...

If you do change the oil make sure a fresh filter added also. Normally the colour cherry red any duller or brown it's past it usefulness.

 

kermit_rr

Very

Full Member

• Mar 17, 2023

• #5

Hi and welcome

Does it show a gear on the dash? Maybe it's come disconnected from the xyz switch

 

brianp38dse

Well-Known Member

• Mar 17, 2023

• #6

Hello and welcome

 

M

Mark tate

New Member

• Apr 2, 2023

• #7

An update , my drugged up mechanic who did a weld on my exhaust didn’t disconnect my battery leads!(long story) but I was told by the guy in the unit next to where he was based! (Now kicked out)
So I plugged it in to diagnostic tool and I got this wiring regulator control selonoid!!! Is this the box under the passenger’s seat??? PCM ????

 

M

Mark tate

New Member

• Apr 5, 2023

• #8

I have since learned he welded the exhaust and didn’t disconnect the battery!!

 

M

Mark tate

New Member

• Apr 5, 2023

• #9

No I check

kermit_rr said:

Hi and welcome

Does it show a gear on the dash? Maybe it's come disconnected from the xyz switch

Click to expand...

ed it’s all fine

 

M

Mark tate

New Member

• Apr 6, 2023

• #10

Got a gent out to flush auto box told me pump in box not pumping?

 

M

Mark tate

New Member

• Apr 6, 2023

• #11

Mark tate said:

No I check

ed it’s all fine

Click to expand...

Nothing on dash

 

marjon

Well-Known Member

Full Member

• Apr 6, 2023

• #12

Sounds like yo have a few dodgey mech around you.
Post in the Range Rover | LandyZone - Land Rover Forum sexion

Am sure many will say the guy that replaced the box screwed up locating the TQ. and the welder needs a couple of jump leads connecting to some delicate parts of his body.

J