I'm just replacing the rear brake pads on a 200TDI, got the old ones out okay, noticed quite a bit of uneven wear on the old ones; one on the NS was down to the metal while the OS were okay, more than 3 or 4mm left on the pad.
Now I'm putting the new set in starting with the OS rear and I can't get the pad in the space between the calliper piston and the disk. the piston is pushed all the way back. When I look at the disk is is quite off centre in terms of where it sits in the calliper.
Anyone seen this before, any ideas?
Now I'm putting the new set in starting with the OS rear and I can't get the pad in the space between the calliper piston and the disk. the piston is pushed all the way back. When I look at the disk is is quite off centre in terms of where it sits in the calliper.
Anyone seen this before, any ideas?