xpuser8334

Active Member
I was offered one from a breakers yard.. but let's say it was too good to be true.
I only have limited funds to put this 2003/53 plate back on the road for my dad...
You need to read my posts. . But my intro will explain all.
Anyway... I've just foolishly been scammed by a retard in Rochdale and the police are investigating this guy.
Long story short.... don't pay a deposit for a car if it doesn't exist...

Anyway..
I'm 200 quid down and still need loads of parts.
A Td4 with a knackered Transmission would be something I would look for too.

I'm in Nottinghamshire and could really do with getting this back on the road.
Body Panels are not necessarily required, and if so... can be returned to whence it came.

Sadly, Dad isn't around to see the car running now. so this is one hell of a sentimental car for me.
I intend to keep it for as long as possible - and not resell it.

Thanks,
Wayne
 
Last edited:
Bump - I'm still looking for loads of bits:-
- Working VCU
- Engine to Bulkhead Coolant Pipes
- Air Con Pipes (under the Radiator to the condenser)
- Gearbox to Engine Bolts
- IRD to Gear Box Bolts
- Heat Shields from under the car and around the turbo area
- Turbo – this one has about 0.5mm of play on the bearing
- Battery Tray
- Steel Vacuum Pipe and all flexible Vacuum pipes – including expansion vessel


Basically; there are nuts, bolts, shields and parts missing from under the engine bay – some of which I have no idea where they are; or how they should fit – hence the reason for the requerst for the whole car (or at least everything from the front doors to the bumper.)
 
Hi I have a 05 HSE TD4 with the clutch slave cylinder gone and in need of 4 new tyres, which makes it uneconomical to repair :(. The bad news is I live in southern Ireland, the car was running perfect it has all the mods required to do so, also had a new high pressure pump fitted around 6 months ago and an injector refurb 2 month's ago, it owes me a few quid so cant give it for free and you would need to collect on a trailer, so don't know if this is any good at all to you but if it is let me know, good look with your project. Matt
 

Similar threads