Sylvester

Member
My name is Sylvester. I replace my timing chain guides on my 2004 Range Rover L322 4.4L. The car started fine. I put 9.5qt of 5/30 Synthetic oil and 4.5 gallons of coolant. I have a coolant leak coming form it appears the transmission housing. When I pop off the transmission rubber cover coolant comes out and its pouring out. I later found out that I didn't bleed the coolant system correct by removing the little black screw on the reservoir and plut I put K-seal in the system. What would be the problem? Please Help?
 
My name is Sylvester. I replace my timing chain guides on my 2004 Range Rover L322 4.4L. The car started fine. I put 9.5qt of 5/30 Synthetic oil and 4.5 gallons of coolant. I have a coolant leak coming form it appears the transmission housing. When I pop off the transmission rubber cover coolant comes out and its pouring out. I later found out that I didn't bleed the coolant system correct by removing the little black screw on the reservoir and plut I put K-seal in the system. What would be the problem? Please Help?
Gooday Sylvester, welcome to "The Zone", this is the section for intro's, you'll probably get an answer for the problem you are having if you re-post this to the L322 Range Rover section of the forum.
 

Similar threads