oos_ya_daddy

oos_ya_daddy

Active Member
I just welded a new crossmember onto my defender. Looks exactly like this one. DEFENDER REAR CROSSMEMBER XMEMBER + EXTENSIONS 90 110 130 HEAVY DUTY LAND ROVER | eBay

I put my tow bar on but thought it was a bit rubbish that the tow bar bolts go through two layers of plate in the crossmember with nothing much to strengthen them. I would have expected to see tubes welded in to sleeve the bolts ?

My Tow bar is a TD5 style one like this http://www.ebay.co.uk/itm/Land-Rove...arts_Vehicles_CarParts_SM&hash=item4d0030eceb
I have not yet fitted the L shaped stiffner underneath as it does not allign with the new holes in the crossmember. To tell the truth, I am a bit confused as to whether this tow bar is what I need.
 
Last edited:
My Dixon Bates which i fitted on my 1994 Defender 90 had 2 bolts go through the bottom hole of the cross member

Yes the bolts went through the double skin, but the kit had a thicj plate with welded captive nuts for the bolts to thread into and spread the load

This is the one I ordered - genuine and very solid!

eBay - The UK's Online Marketplace

Hard to tell, but the bars on yours look slightly different
 
I don't know which Defender you have but when I recently had my rear cross member fitted the guy pointed out that I had a Series type tow bar which did not have the bars from the tow bar to the chassis. He changed it for one that does have the bars. He pointed out that if I had towed something heavy it could have warped the rear cross member.
 
tombardier said:
isn't there a really thick plate inside with the same size holes?
Click to expand...

What do you mean by "inside" ?

I dont think the wall of the crossmember is strengthened at all as far as I can see. What I am most worried about is the face plate flexing the wall of the crossmember and deforming it.
 
There is definately no thicker plate in there. Think I may have a duff one ? It has two bits of strengthening that could be described as a W and an M that go round the holes. I bought the crossmember off a friend who got it from Richards Chassis. So I may give them a call.

Cheers for the help.

I was not sure where the:rolleyes: "really thick plate" you were refering to was.
 
You must log in or register to reply here.

Similar threads

B
Defender Tow bar comparability
Replies
17
Views
2K
Benji55
B
dag019
Wanted Early Defender Tow Bar Bracket - NRC8208
Replies
0
Views
632
dag019
dag019
F
Tow Bar Electrics Freelander 2
Replies
1
Views
327
Nodge68
Nodge68
dag019
Station wagon conversion
Replies
11
Views
898
shaynecm
S
R
Modified tow bars
Replies
3
Views
685
dag019
dag019