Hi guys,
I just got a Nanocom for my vehicle, a 2001 Discovery 2 V8 automatic, and I have a couple of questions:
At idle engine speed reads 840 and engine load 23.0%
Air load: 0.00
Idle air: 292.13
Idle load air: 0.03
Are these figures OK?
On one of the pages it says also:
ABS - OFF
Traction control: OFF
SRS: OFF
Are these OK to say this?
TC seems to work and lights up when one of the tires slips on soft ground. ABS also seems to work when I test it.
Furthermore, I have also had all four front ball joints changed two weeks ago and ever since then the steering wheel has developed a nasty shake once I hit 70 km/h and kind of abates around 80 km/h. However, sometimes it disappears. This is very rare but it has happened. Unfortunately I am over 500 km away from the guy who did the work so cannot take the car in. Additionally there is the COVID-19 situation in the country so self-isolation is the name of the game these days.
Any pointers and ideas would be greatly appreciated.
Thanks a million.
Regards
Dule
I just got a Nanocom for my vehicle, a 2001 Discovery 2 V8 automatic, and I have a couple of questions:
At idle engine speed reads 840 and engine load 23.0%
Air load: 0.00
Idle air: 292.13
Idle load air: 0.03
Are these figures OK?
On one of the pages it says also:
ABS - OFF
Traction control: OFF
SRS: OFF
Are these OK to say this?
TC seems to work and lights up when one of the tires slips on soft ground. ABS also seems to work when I test it.
Furthermore, I have also had all four front ball joints changed two weeks ago and ever since then the steering wheel has developed a nasty shake once I hit 70 km/h and kind of abates around 80 km/h. However, sometimes it disappears. This is very rare but it has happened. Unfortunately I am over 500 km away from the guy who did the work so cannot take the car in. Additionally there is the COVID-19 situation in the country so self-isolation is the name of the game these days.
Any pointers and ideas would be greatly appreciated.
Thanks a million.
Regards
Dule