G

Gtbagstar

Member

• Jul 11, 2014

• #1

Hi, I've just been getting ready to put new door hinges on truck and I have found a hole just above the lower door hinge, so I've cleaned it up with wire brush and it's developed into a biggers hole (not happy). So I investigated a bit more and the top of the post is shot too, can anything be done to sort it or is it a big job and go to a body shop with it.

 

jamesmartin

Well-Known Member

• Jul 11, 2014

• #2

you can get new pillars to weld in , but usually requires more than you think to begin with

 

G

Gtbagstar

Member

• Jul 11, 2014

• #3

Have any idea where I could find them. I've just download parts catalog and I can't find any on that. And by any chance do you know somewhere I could find out how it should be done to repair the problem
Cheers

 

jamesmartin

Well-Known Member

• Jul 11, 2014

• #4

try here
https://www.google.co.uk/url?sa=t&r...pDk_b8oLPrKex5SnQ&sig2=GvoKCoutzNJoqx38NotfzQ
and if you do a search theres bound to be a thread on it

 

Brown

Well-Known Member

Full Member

• Jul 11, 2014

• #5

There are some pictures of Paul D doing some repairs to his bulkhead and A post here
http://www.landyzone.co.uk/lz/f7/my-new-old-defender-248534-20.html
You can see the various repair components available pretty well. It's almost like an advert for them. If you're handy with a MIG it shouldn't be too hard to put them together.

 

G

Gtbagstar

Member

• Jul 14, 2014

• #6

Cheers I'll go look at that now.