How hard is it to put a v8 block in it?:doh:g
jmattley
New Member
Nice landy, if you want to increase the height, stick some higher lift parabolic springs on instead of the standard leaf springs, the parabolics are just modern, nicer versions of leafs.
As for a V8, I once thought of doing that, but since my series 3 is a daily drive (not daily, but my only car) and I'm a poor student, I couldn't possibly afford the insurance or petrol, so I'm stick a 200 TDI in instead, but a V8 ain't too hard.
I'm sure someone else will tell you that though.
Enjoy your landy, is it your only car?
As for a V8, I once thought of doing that, but since my series 3 is a daily drive (not daily, but my only car) and I'm a poor student, I couldn't possibly afford the insurance or petrol, so I'm stick a 200 TDI in instead, but a V8 ain't too hard.
I'm sure someone else will tell you that though.
Enjoy your landy, is it your only car?
Mseries3
Well-Known Member
Rocky Mountain Parabolic Suspension
Front Springs 73588:
Rear Springs 73589:
Is anyone using them in this set up and what do you think to this? im looking at doing a bit of off roading with it.
Front Springs 73588:
Rear Springs 73589:
Is anyone using them in this set up and what do you think to this? im looking at doing a bit of off roading with it.
90truckcab
Well-Known Member
aye parrots bollocks are good springs,
The Green Oval
or in the Q's and A's bit
except if its a Series - then here or here for the S3 or here for the S1.
Last edited:
