MattYorke

Active Member
What Is It?

Certainly not a new purchase, I bought it in June 2008. But it has recently been the subject of a bit of attention over the last 12 months.
A 1989 Factory 90 V8 Country Petrol.

I bought it because I previously had a 1981 Series 3 Stage 1 V8 which I got rid of many years ago, and I fancied another one. I'm not a particular Landrover fanatic like many are - but I do like a V8 engine under the bonnet. So I wandered in to Safari Engineering in Yateley and asked dave if he knew anyone with a 90 V8 for sale. It just so happened he did. The blokes nickname was Jesus and he used it as his dog walking car, until the engine had expired (little end failure). Now, a wet dog is a smelly thing, so it took a lot of time and effort, mostly by jetwashing the inside of the car, to eventually get rid of the smell of dog. But the name persists and it is known as "The Dog" in our household.

Over the years, have done many many jobs on it, when I first bought it I replaced the engine, going from a broken 3.5 carb to a 4.0 EFI, which I then later put a megasquirt on. Various welding jobs over the years as and when it needed them (rear crossmember, for example)

A few years back:
20150818_184757857_ios.jpg

img_0104.jpg

And sometimes I do work on it:
20170603_114608222_ios.jpg


This time it needed a little more work, so I gave it a fairly decent going over. I wanted to fit rear seats to it, but proper, forward facing ones with 3 point seat belts, not the sideways facing ones only with a lap belt.

On inspection of some of the bodywork in the vicinity of where the seatbelts would mount, I realised some work was needed:
20220124_144640698_ios-1.jpg


The lower panel - easy to replace with a stock item from landrover, but that upper bracket is not available, so I had to make one.

First I made a template in CAD:
20220126_180142282_ios.jpg


And then cut it out in steel:
20220130_110742562_ios.jpg


I think it came out well:
20220130_135824097_ios.jpg

20220130_185632448_ios.jpg


Bulkhead Removal

As is often the way, I then started to get carried away, so I then removed the bulkhead, replaced with a bulkhead brace bar, to give a lot more room in the interior and make it easier for the kids to get in and out:
20220130_173359124_ios.jpg


Body Cappings

And carried on replacing any rust as I found it:
20220205_113229212_ios.jpg


Brand new cappings:
20220205_141356802_ios.jpg


It was starting to come together quite well:
20220208_132905320_ios.jpg


Leaky Sunroof

The sunroofs are well known for leaking, so I decided to remove the sunroof entirely. Even though the roof is a bit old and dented, I still wanted the new panel to sit flush and look tidy:
20220212_104150363_ios.jpg


A nice sheet of 1.5mm NS4 ready to cut:
20220212_104220678_ios-1.jpg


Seemed to go OK:
20220212_150716105_ios.jpg


And fitted nicely:
20220212_151654998_ios.jpg


Quite happy with the end result:
20220212_164021546_ios.jpg


Bulkhead Repairs

At this point, I was looking at the bulkhead. I knew the top corners were a bit rust and I'd put some patches on them a few years back. I decided it was time to do them properly. It was fairly scary how rusty the structures were underneath once I started cutting:
20220305_165621889_ios.jpg


This took a fair bit of work to make:
20220312_120938244_ios.jpg


But came out pretty well. I did both sides, naturally:
20220312_184647070_ios.jpg


The Repaint

As I then suffered a severe bout of scope creep, I decided that as I'd just replaced a bunch of rust with steel, it just wouldn't do to leave them unpainted. But what colour and how to do it. I decided it might be fun to learn to spray a bit. I did learn a bit - the main lesson being, it's well worth paying someone else.

Nevertheless, it came ouf OK, although I intentionally did it in white because that's more forgiving of my errors. All done in cellulose. Would have liked 2-pack, but I don't have the booth or breathing equipment to do it. Felt like I spent forever filling and sanding - and even then, it's not a great job!
20220410_171056637_ios.jpg

20220502_112154448_ios.jpg


Slowly but surely, things progressed:
20220806_163520184_ios.jpg


Gradually it started to look like a landrover again:
20221015_130209400_ios.jpg


Apple Carplay
One thing I like in cars is to have apple carplay, plus I wanted front and rear hitchcams to help me line up a trailer first time. But I don't like the bulky dashboard solutions mosf of them end up with, so instead I found a super compact 5" screen carplay unit which I fitted along with some auxiliary switches:
20221130_091338527_ios.jpg


The slighty curveball here was that the LT85 gear stick is further forwards than the other variants, so I had to modify the gearstick to make it fit:
20221130_180530199_ios.jpg


Somewhere during all this I replaced the gearbox too with a refurbished LT85 from Ashcrofts.

Rear Seats
Finally I was in a position to start fitting the rear seats, using the exmoor trim Loc N Fold ones. They're really good.
20221213_184322998_ios.jpg


Cab Heat
I also decided to add another heater to give a bit more winter heat in the cab:
20221113_175156367_ios.jpg


Oil Cooler

And made some proper brackets for the oil cooler:
20221113_125943317_ios.jpg


Finally

So with it all back together, here's where we are today. Still on the original chassis, I will replace that one day, and I need to do new roof lining and carpets in the cab. But looking smarter than it was, I think:
20230205_112112851_ios-1.jpg

20230205_112117433_ios-1.jpg
 
Last edited:
Very nice!:cool::cool::cool:

I had a white V8 90 CSW some years back. It’s the one Landy I regretted selling. It was starting to get rust in the upper corners of the bulkhead but that with the fuel bills made it too expensive to keep. But yours looks awesome and has made me think again that I should have kept it!
 
Thank you. I’ll add some more pics of the bulkhead work. What looked like a cosmetic bit of rust on the outside was really nasty on the inside and took and age to repair, since it has to be both strong enough and the right fit for the windscreen.
 
Nice work, what an improvement.
Make sure you chuck a load of cavity wax into the bulkhead (through the top hinge bolts) so it won't rot out in the near future.
I've repaired 2 bulkheads years ago (top sections and both footwells) and don't particularly want to do any more, lol
 
Yeah, the footwells are OK, but not great. I just had enough of it, so I patched them and they're sound enough for now and I'll whip the wings off in a couple of years or whenever and do them with new then. I'm actually not too worried by the footwells - at least you can buy the panels, unlike the innerds of the top corners or various other bits I had to make.
 
This is how nasty it looked beforehand. I hated that white door, it called me names every time I looked at it and all the kids bullied me about it.
I laughed at it as I took it to the dump, to ensure it wouldn't get reused again. I swear I heard music playing as I walked away from it in the dumpster.
20190104_214502619_ios.jpg
 

Similar threads