Nev

Nev

New Member
Here are some pics of my 109" before and after. What does everybody think ?
 

Attachments

  • 109.jpg
    109.jpg
    87.5 KB · Views: 276
  • Series 3 001.jpg
    Series 3 001.jpg
    63.2 KB · Views: 316
  • Series 3 003.jpg
    Series 3 003.jpg
    85.8 KB · Views: 274
Sean said:
does it matter what we think of it ?

if your happy with it then isnt that all that really matters ?
Click to expand...

Are you like this down the pub as well? No wonder you're on here all the time...lighten up man ;)
 
Nev said:
Here are some pics of my 109" before and after. What does everybody think ?
Click to expand...

nice one! what engine's it got? presonally i'd have kept the bonnet mounted spare wheel but not much point of that if you've one on the back door! did you paint it yourself?
 
She has a 2 1/4 petrol that is getting rebuilt in the summer. Had to bin the spare wheel mounted bonnet as it was beaten up really bad. Painted myself with a soft roller over the last two days really chuffed at the outcome.:)
 
looks really good. Nice job. Inspires me to get the roller out and paint my patchwork quilt of a series.
 
Nice job, looks smashing!

Im looking at rollering my 90 in the summer too, by the way what paint did you use and did you strip all the paint off and re prime, or just stip areas that had oxidised and bubbled the paint.

Ollie
 
Looks nice, is that a 110 volt socket hanging out of the side door, if so on board genny???

Or just a padlock?
 
olmasters said:
Nice job, looks smashing!

Im looking at rollering my 90 in the summer too, by the way what paint did you use and did you strip all the paint off and re prime, or just stip areas that had oxidised and bubbled the paint.

Ollie
Click to expand...


All i did was run the sander over her with 80 grit paper the wiped down and the painted with a radiator roller. The paint i used was from Paddocks and i olny used one tin.
 
looks good, i am prob ten years off painting my series2, farmer round the corner from me did a ser3 but painted it all blue, roof too, didnt look right for some reason, he's a tight git so it were prob so he dint have to but a tin of white as well ! looks a good finish for a roller, werit a sponge type gloss roller or the synthetic pile roller ?
 
90truckcab said:
looks good, i am prob ten years off painting my series2, farmer round the corner from me did a ser3 but painted it all blue, roof too, didnt look right for some reason, he's a tight git so it were prob so he dint have to but a tin of white as well ! looks a good finish for a roller, werit a sponge type gloss roller or the synthetic pile roller ?
Click to expand...


I used the small Sponge type roller for radiators
 
I belong to another forum [not landys] that are just getting into roller painting. I can see the advantage for a landy as it's all flat panel but what about the quality of finish. Anyone tried Rust-oleum?

I'm thinking of using Tekaloid - i believe it is the best quality brush/roller paint available.
 
Nev said:
I used the small Sponge type roller for radiators
Click to expand...


oh rite, did you get bubbles off the roller? when i use them on thinner paints gloss etc, it seems to get tinny little bubbles in the finish where the roller is squeezed, im not bothered on onther things , but if it effects the finish of your landy its a different story. as i say im years off painting mine, just interestin to kno, will prob spray mine as i have the room.
 
You must log in or register to reply here.

Similar threads

1976 Land Rover
Series 3 109 fuel tank outrigger missing??
Replies
6
Views
427
1976 Land Rover
1976 Land Rover
Guldner
My Series 3
Replies
3
Views
286
Wildefalcon
W
C
Truck cab fitting help
Replies
10
Views
346
Chonker
C
A
1984 109 FFR 24v oil temp gauge issues
Replies
1
Views
374
layfin
L
R
Series 3 Original tyre sizes?
Replies
6
Views
619
grewth
G